How do I do a System Recovery on Lenovo?
When the PC is completely turned off, press the Novo Button on your Laptop. Novo button is a small circular button usually near the power button or on the left side of the laptop. The system will power on to display the Novo Button Menu. Use your arrow keys to select System Recovery and press Enter.
Remove everything will remove your personal files, accounts, and apps/programs that did not come with this PC and any changes made to the settings. See Step 6.
Press F12 or (Fn+F12) rapidly and repeatedly at the Lenovo logo during bootup to open Windows Boot Manager.
OneKey Recovery allows to you restore your PC via a previously created backup but will delete all data on the system drive. Thus, you need to back up the files you need in advance.
...
Here's how:
- Press Windows logo key + L to get to the sign-in screen. ...
- Your PC will restart in the Windows Recovery Environment (WinRE) environment.
- On the Choose an option screen, select Troubleshoot > Reset this PC, and then choose one of the options in the previous table.
- Set the PC to the power off status, then use the tip of an unfolded paper clip (or similar object with a sharp tip) to gently press the Novo button. ...
- Click Troubleshoot -> Reset this PC.
- Two options are available: ...
- Click Keep my files. ...
- Click Reset to proceed with the AC adapter plugged in.
What can I do with the NOVO button? In Windows, the button can be used to start Lenovo OneKey Recovery. Use the tip of an unfolded paper clip (or similar object with a sharp tip) to gently press the Novo button with the upside down U or double-click the OneKey Recovery icon.
For Lenovo All-in-ones, there is no NOVO button. To run Lenovo Onekey Rescue choose one of the options: Repeatedly press and release the F2 key after turning on the computer until entering Lenovo Rescue System, then select OneKey Recovery.
- In Windows (or power off PC), press the Novo button or double-click the OneKey Recovery icon to start the Lenovo OneKey Recovery System.
- From the Novo Button Menu --> choose System Recovery. ...
- Select either Restore from user's backup or Restore from initial backup, then click Next.
Power on the system by pressing the power button. Repeatedly tap the F1 key when the Lenovo, ThinkPad, ThinkStation, or ThinkCentre logo appears, The computer may beep once to indicate that it will boot to BIOS.
Is F12 a boot menu?
Common keys for accessing the Boot Menu are Esc, F2, F10, or F12, depending on the computer or motherboard manufacturer. The key to press is usually specified on the computer's startup screen. The Boot Menu allows users to select what device to load an operating system or application from as the computer is booting.
F1 | Mutes/unmutes the sound. |
---|---|
F8 | Displays all currently active apps. |
F9 | Turns on/off the backlight of the LCD screen. |
F10 | Toggles the display between the computer and an external device. |
F11 | Decreases the display brightness. |

It does not affect user data or files. This means that a system restore point can be safely used by a user. A system restore will not delete personal files such as documents, pictures, music or videos.
But many people will ask: Does Recovery mode delete everything? The answer is: Entering Android Recovery will never delete everything on the device. But, Android Recovery has an option that enables you to delete everything and reset the device to factory settings.
eRecovery is very easy to use and allows you to erase data, install official updates or repair and recover previous installations.
Select Start, Power, and then press and hold Shift key while clicking Restart. Select Start, Settings, Update, and Security, Recovery. Under Advanced startup, click Restart now.
- Press and hold down the Volume Down button and keep holding it, then press and hold the Power button as well for a few seconds, and let go when you see the Android mascot on its back on screen.
- Use the Volume Down button to cycle through the options until you find Recovery mode and press the Power button to load it.
- Click Start.
- Click the power button icon.
- Press and hold down the Shift key and then click Restart. ...
- Select Troubleshoot.
- Go to Advanced Options > Startup Repair.
- After the startup repair process is complete, reboot the computer.
Access BIOS (laptop, all-in-one). Go to the Exit tab and select Load Optimal Defaults or press F9. Press F10 to save and exit. Reboot.
Our guide to using the BIOS shows how to reset your BIOS to default options, but you can't factory reset Windows itself through it. There's also no way to factory reset your laptop without turning it on; you need power to perform all the above operations.
How do I restore my computer to factory settings?
🖥 How to Factory Reset a PC
Navigate to Settings > Update & Security > Recovery. You should see a title that says “Reset this PC.” Click Get Started. You can either select Keep My Files or Remove Everything.
Use a straightened paper clip in the reset hole to reset the laptop. Some ideapads have a Novo button that can be used to get to the BIOS or recovery mode. On other laptops (without a pin hole reset or Novo button), press and hold the power button for at least 10 seconds.
Press the power button again to turn on your device. This time, allow your device to fully start up. Select Advanced options. Now that you're in winRE, on the Choose an option screen, select Troubleshoot > Advanced options > Startup Repair > Restart.
Remove the battery and unplug the AC adapter. Then, press and hold the power button for 20 seconds. After that, try booting it up again with the battery and charger. Next test to try would be to remove the battery again and connect just the AC adapter.
...
Hard reset your Chromebook
- Turn off your Chromebook.
- Press and hold Refresh + tap Power .
- When your Chromebook starts up, release Refresh .
For laptops with an internal battery (not removable), use the pin hole reset. Laptops with an internal battery may have an emergency pin hole reset button on the bottom cover (see emergency-reset hole in the User Guide for more information). Use a straightened paper clip in the reset hole to reset the laptop.
Restores your computer's system files to an earlier point in time without affecting your files, such as e‑mail, documents, or photos. If you use System Restore from the System Recovery Options menu, you cannot undo the restore operation.
Note: Recovery files are several gigabytes in size. Depending on your network connection, this process may take several hours. The Lenovo Digital Download Tool shows the time remaining to complete the process. Tip:You can pause the download process by clicking the Pause button and resume later where you left off.
It usually takes 30 to 45 minutes for the process to complete. If it takes more than the given time frame, refer to the solutions below to fasten the System Restore process.
Solution. Press F12 or (Fn+F12) rapidly and repeatedly at the Lenovo logo during bootup to open Windows Boot Manager. Select boot device in the list.
How do I force BIOS on Lenovo?
Restart the machine and press the Enter key at the Lenovo logo. There may be a press Enter to Interrupt message on the screen. This may cause the Startup Interrupt Menu to appear. Pressing F1 at the Startup Interrupt Menu will cause the computer to enter BIOS.
After your PC restarts, you'll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you'll need to use the internet, select 5 or press F5 for Safe Mode with Networking.
The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Some options, such as safe mode, start Windows in a limited state, where only the bare essentials are started.
Power on, or restart your system. Press F11 when you see the following message: F11 = Boot Manager. If your operating system begins to load before you press F11, allow the system to complete the booting, and then restart your system and try again.
On many PCs, as the computer is booting, you see an option to press F10 to enter setup. Pressing F10 when this message is displayed enters the BIOS or CMOS setup. How to enter and exit the BIOS or CMOS setup.
Describes the new function keys (F9, F10, F11) allow you to control, and navigate your computer easily, thus boosting your productivity. F9 key to easily access to the commonly-used notification & action settings. F10 or F11 to quickly respond to the VoIP calls even without a mouse.
F11: Open a keyboard setting page. F12: For Windows 10, the key invokes the function defined by the user. If no function is defined, press this key to open the Cortana personal assistant.
The function keys or F keys are lined across the top of the keyboard and labeled F1 through F12. These keys act as shortcuts, performing certain functions, like saving files, printing data, or refreshing a page.
It repairs the Windows environment by reverting back to the files and settings that were saved in the restore point. Note: It does not affect your personal data files on the computer.
Step 1: Go to Control Panel and click Recovery, select "Open System Restore". Step 2: Select "Undo System Restore" and click "Next". You can click "Scan for affected programs" to see what will be changed after undoing the System Restore. Step 3: Click "Finish" to complete.
Is system recovery same as reset?
System Restore is used to resolve system malfunction or poor performance due to any recent changes made to the system configuration. Reset on the other hand is required for more critical issues such as damaged system files or a malware slowing down the system performance.
The recovery partition is part of the hard drive where your device's factory settings are stored. In rare cases, this can become infected with malware. Hence, doing a factory reset will not clear the virus.
The Android recovery mode is a mode of Android used for installing updates. It consists of a Linux kernel with ramdisk on a separate partition from the main Android system.
Running a factory reset, also referred to as a Windows Reset or reformat and reinstall, will destroy all data stored on the computer's hard drive and all but the most complex viruses with it. Viruses can't damage the computer itself and factory resets clear out where viruses hide.
- Press the Volume keys to locate the option Reboot system now in the recovery mode.
- Use the Power button to confirm the option.
- Your phone will reboot and be in normal mode.
How to Exit eRecovery Mode on Huawei Phone? While you are in the eRecovery mode, get back to the main screen of the eRecovery and choose the option that says reboot system now. It will reboot your device and you will be out of eRecovery.
In simple terms, the Recovery Mode of Huawei device is known as eRecovery. If you want to update or wipe the device, you have to access eRecovery. But accessing Huawei eRecovery P20 Lite is the last resort if your device is not loading the OS automatically.
Solution. The Novo button is usually located on the side or near the power button of the machine. The button is either a small button or pinhole with a backwards arrow icon next to it that resembles an upside down U.
- Select the Start button, then type control panel in the search box next to the Start button on the taskbar and select Control Panel (Desktop app) from the results.
- Search Control Panel for Recovery, and select Recovery > Open System Restore > Next.
- Make sure the USB recovery drive is connected to the PC.
- Power on the system and continually tap the F12 key to open the boot selection menu.
- Use the arrow keys to highlight the USB recovery drive in the list and press Enter.
How do I set System Recovery?
- In the search box on the taskbar, type Create a restore point, and select it from the list of results.
- On the System Protection tab in System Properties, select Create.
- Type a description for the restore point, and then select Create > OK.
Press and quickly release the volume down button. Then, press and hold the side button until you see the recovery mode screen. iPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold the top (or side) and volume down buttons at the same time.
What is the NOVO button? The Novo button comes with Lenovo Onekey recovery software. This allows you to enter Lenovo Onekey recovery if the PC fails to boot normally. Under the Novo Button Menu, there are options to perform system recovery, enter the BIOS, or configure the boot menu.
To open the System Recovery Options menu on your computer
You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
Navigate to the Windows 10 Advanced Startup Options menu.
On many laptops, hitting F11 as soon as you power on will get you to the Windows 10 Advanced Startup Options. Booting off an install disk and hitting Next then Repair offers a secondary option.
- Press Windows logo key + I on your keyboard to open Settings. ...
- Select System > Recovery . ...
- Under Recovery options, next to Advanced startup, select Restart now.
- After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
Recovery Media allows you to reformat the hard drive, reinstall the operating system and reset the system to the original Lenovo factory condition. Recovery media helps when the following occurs: Hardware failure – A Hard Disk Driver (HDD) failure, and replacement.
- Open the Settings app. ...
- Go to Update & Security.
- Select the Recovery tab.
- Under Advanced Startup, click Restart Now.
- After the computer reboots, go to Troubleshoot > Advanced Options > Startup Repair.
The Android recovery mode is a mode of Android used for installing updates. It consists of a Linux kernel with ramdisk on a separate partition from the main Android system.
The recovery process is designed to recover a server to a previous operating state, in the event of a hardware or operating system failure. The recovery process will begin by starting your computer using a Bootable RecoverAssist Media or a Bootable Backup Media.